The Essential Laws of Resources Explained

A Guide to Wood Science

Wood science is the study of wood as a material that is renewable and of biological origin. In other words, the term wood science can also be known as wood technology. Other products are put alongside wood for easy testing and study. The wood is checked against the other materials properties, performances, value, and work-ability. Wood has many advantages and this technology takes the advantages and utilizes them. The wide range of products where wood can be used is just one of the many advantages that give wood an upper hand over other products. Once a tree has been cut down another can be planted in the same spot. Timber can be utilized in very many applications, and this makes it more valuable.

Protection of wooden structure and products is a must if you want to keep the good looks in place. The biggest threat to wood being moisture and insects has to be kept away from the wood. The rotting and decay of the timber products are caused by the moisture and the insects. There are many ways timber is treated among them being the ACQ in other words alkaline copper Quaternary. This is a copper-based preservative that is applied to the wood for protection. There are a few disadvantages of this method as a mode of wood preservation. It is a highly corrosive chemical that affects most metals that are used together with the wooden products. The saturation level of any treatment will depend on where the wood is going to be used and the species of the wood. The level of chemical concentration will be determined by where the piece of wood is going to be put to use.

The use of copper metal is another method of wood treatment that is fast being accepted. This method is being accepted fast because is friendly to wooden fasteners. This process is what in other words called the micronized copper wood preservative. In this process microscopic particles of solid copper metal are mixed in a liquid carrier and injected to the wood at high pressure. The process eliminates the need to dissolve the copper as is done in earlier copper-based preservatives. When this process is used to treat timber the timber properties are increased highly. The timber treated in this way is used in both outdoor and indoor frames that last very long.

The micronized copper preservative has proven to be highly effective in protecting the wood against fungal decay and termites. It has also shown to be an improvement in corrosion resistant properties to metal fasteners. When you use this method to treat wood, then you will not need to worry for at least ten years.